X hits on this document

PDF document

D-SERIES COMPACT EXCAVATORS - page 4 / 4

12 views

0 shares

0 downloads

0 comments

4 / 4

6145 lb. (2788 kg)

6477 lb. (2939 kg)

1.2 mph (1.9 km/hr.) 1.9 mph (3.1 km/hr.) 3 Piston/Gear 17.5 gpm (66.2 L/min.) 12.3 gpm 46 L/min.) 14 gal. (53.3 L) 4.8 gal. (18.2 L) Rubber 12.6 in. (320 mm) 4.2 PSI (29 kPa)

1.2 mph (1.9 km/hr.) 1.9 mph (3.1 km/hr.) 3 Piston/Gear 17.5 gpm (66.2 L/min.) 12.3 gpm 46 L/min.) 14 gal. (53.3 L) 4.8 gal. (18.2 L) Rubber 12.6 in. (320 mm) 4.2 PSI (29 kPa)

Drive

Bobcat® 325 / 328 Excavator

SPECIFICATIONS

Engine

Make Model Fuel Cooling Displacement Horsepower

Performance

Operating Weight Maximum Travel Speed

Low High Hydraulic Pump

Type Total Capacity Auxiliary Hydraulic Flow Fuel Tank Capacity Hydraulic Tank Capacity Standard Track Shoes

Width Ground Pressure

Liquid

Liquid

100.5 cu. in. (1.6 L)

100.5 cu. in. (1.6 L)

E

Kubota

Kubota

D1703-EB

D1703-EB

Diesel

Diesel

325

328

Working Range

27.5 hp (20.5 Kw) @ 2200

rpm 27.5 hp (20.5 Kw) @ 2200 rpm

B

D

A

C

Left

90

90

Right

50

50

Swing Speed

9.2 rpm

9.2 rpm

Tail Swing Radius

47.3 in. (1200 mm)

47.3 in. (1200 mm)

Each track is independently driven by a hydrostatic axial piston motor connected to a planetary gear reduction box.

Swing System

Boom Swing

Counterweight Kit* Enclosed Cab with Heater Excavator Operator Training Kit Excavator Service Safety Training Kit

Attachments

763 lb. (346 kg)

Lifting Chain Kit Long Arm Kit* Special Application Kit Steel Tracks

Three-tine Grapple Trenching Buckets

Auger Breaker Cutter Crusher Grading Bucket

Hydraulic Clamp Plate Compactor Power TiltRipper

*325 Only

For 325 - 165.2 in (4196 mm) For 328 - 164.2 in (4170 mm)

Rated Lift Capacity

Over End, Blade Down, Maximum Radius, Ground Level

Options / Accessories

913 lb. (414 kg)

For 325 - 119.4 in (3034 mm) For 328 - 118.4 in (3007 mm)

325

328

160 in. (4055 mm) 109.4 in. (2779 mm) 100.6 in. (2555 mm) 70.9 in. (1801 mm) 166.7 in. (4233 mm) 41.3 in. (1050 mm) 4766 lbf (21200 N)

167.4 in. (4251 mm) 116.9 in. (2968 mm) 112.6 in. (2859 mm) 82.5 in. (2096 mm) 178.3 in. (4529 mm) 53.1 in. (1350 mm) 4766 lbf (21200 N)

  • A.

    Max. Digging Height

  • B.

    Max. Dumping Height

  • C.

    Max. Digging Depth

  • D.

    Max. Vertical Wall Digging Depth

  • E.

    Max. Digging Reach At Ground Level

Arm Length Bucket Breakout Force

Additional Features

  • 360-degree cab rotation

  • Independent boom swing

  • Backfill blade

  • Rubber tracks

  • Low machine weight

  • Easily transportable

  • Hydraulic joystick control

  • Dig square hole from one location

  • Multi-attachment versatility

  • X-Change attachment mounting

system

  • High-back suspension seat on 328

  • Electrical accessory plug

  • Beverage holder in operator area

NOTE – Where applicable, dimensions are in accordance with Society of Automotive Engineers (SAE) and ISO standards. Specifications and design are subject to change without notice. Pictures of Bobcat excavators may show other than standard equipment. All dimensions are shown in inches. Respective metric dimensions are enclosed by parentheses. Bobcat Company complies with the requirements of ISO 9001 as registered with BSI.

The Bobcat Attachments Advantage: Bobcat attachments are engineered and manufactured to fit Bobcat excavators for optimum job performance, dependability and durability.

94.3 in (2395 mm)

58.1 in (1476 mm)

20.9 in (532 mm)

54.3 in (1380 mm)

71.3 in (1811 mm)

56.7 in (1440 mm)

14.9 in (378 mm)

55.0 in (1398 mm)

12.6 in (320 mm)

Bobcat Company • 250 East Beaton Drive • P.O. Box 6000 • West Fargo, ND 58078 • www.bobcat.com

B-1730

Printed in U.S.A.

Kn-25M-900-#610032-F

Document info
Document views12
Page views12
Page last viewedTue Dec 06 22:36:02 UTC 2016
Pages4
Paragraphs169
Words1390

Comments