X hits on this document

50 views

0 shares

0 downloads

0 comments

13 / 18

Gateway Installation and Support Guide

Appendix C: Installing the Gateway on Other Operating Systems

Follow these instructions if you are using an operating system that is not supported by the Setup Wizard CD (such as any Macintosh OS prior to 10.2, UNIX, or Linux).

Connect your first computer to the gateway

There are many ways to set up your network, but typically the first computer is located in the same room as the gateway and your broadband connection. Ethernet is the preferred connection method for your first computer, although instructions for connecting via USB are also provided.

To begin your gateway installation:

  • 1.

    Remove the gateway, power adapter, and cables from the gateway box.

  • 2.

    Connect the provided power adapter from the gateway’s POWER port to an electrical outlet.

  • 3.

    Connect the provided Ethernet cable from the broadband modem to the BROADBAND MODEM port on

the gateway. Proceed to the Ethernet or USB connection instructions that begin on the following pages.

11

Document info
Document views50
Page views50
Page last viewedTue Jan 17 22:00:46 UTC 2017
Pages18
Paragraphs293
Words3486

Comments