X hits on this document

38 views

0 shares

0 downloads

0 comments

14 / 18

Gateway Installation and Support Guide

Connecting your computer to the gateway using Ethernet:

1.

Connect the provided yellow Ethernet cable from the gateway’s LOCAL ETHERNET port to your computer’s Ethernet port.

2. Proceed to page 14 to configure your Internet connection.

Connecting your computer to the gateway using USB and installing the 2Wire USB driver on computers running other Windows operating systems:

Connecting your computer to the gateway using USB requires an available USB port. Only one Windows or Macintosh computer can be directly connected to the 2Wire gateway using the USB connection. Refer to page 8 for instructions.

Connecting your computer to the gateway using USB and installing the 2Wire USB driver on Macintosh computers running OS 9.X:

Connecting your computer to the gateway using USB requires an available USB port. Only one Windows or Macintosh computer can be directly connected to the 2Wire gateway using the USB connection.

1.

With your computer powered on and the 2Wire Setup Wizard CD still in the CD-ROM drive, double-click the 2Wire CD icon on your desktop.

  • 2.

    Double-click 2Wire USB to begin the driver installation.

  • 3.

    If you have set up an administrator name and password, the Authenticate screen opens. Enter your

administrator name and password and click OK.

4.

Follow the on-screen instructions. When the driver installation is complete, you will be prompted to restart your computer.

12

Document info
Document views38
Page views38
Page last viewedWed Dec 07 09:29:14 UTC 2016
Pages18
Paragraphs293
Words3486

Comments