X hits on this document

34 views

0 shares

0 downloads

0 comments

6 / 18

Gateway Installation and Support Guide

Running the 2Wire Setup Wizard Manually

If after one minute the gateway Setup Wizard does not automatically run:

Windows Users:

Mac Users:

Double-click the My Computer icon located on the desktop. Double-click the icon that corresponds to your CD-ROM drive. Double-click Setup.exe and follow the on-screen instructions. Double-click the 2Wire icon. Double-click the 2Wire Setup Wizard icon.

Verifying That Your PC Adapter Driver is Installed Correctly

There are two common errors that may occur during installation that will result in an error message:

alled or is incompatible with your system. Follow the procedure appropriate to your system to determine whether the driver was correctly installed.

Windows XP:

Windows 2000:

  • 1.

    Click Start and click Control Panel.

  • 2.

    Double-click the System icon.

  • 3.

    Select the Hardware tab, then click Device Manager.

Continue to step 4 under Accessing Driver Status on page 5.

  • 1.

    Click Start >Settings and click Control Panel.

  • 2.

    Double-click the System icon.

  • 3.

    Select the Hardware tab and click Device Manager.

Continue to Step 4 under Accessing Driver Status on page 5.

Windows 98 SE or Windows ME:

  • 1.

    Click Start >Settings and click Control Panel.

  • 2.

    Click the System icon.

  • 3.

    Select the Device Manager tab.

Continue to Step 4 under Accessing Driver Status on page 5.

4

Document info
Document views34
Page views34
Page last viewedSun Dec 04 13:37:37 UTC 2016
Pages18
Paragraphs293
Words3486

Comments