X hits on this document

52 views

0 shares

0 downloads

0 comments

7 / 18

Gateway Installation and Support Guide

Accessing Driver Status

1.

Click the "+" sign next to the Other devices and/or Network adapters categories to expand them. This displays a list of all adapters and/or devices that you have installed. Check to see if your adapter is marked with a yellow question mark (driver not installed) or exclamation point (incomplete driver installation or driver not compatible with the operating system).

IMPORTANT: If your adapter or device does not appear in the list, it may not be properly installed. Reinstall the adapter according to the appropriate documentation.

If the USB driver for direct USB connection between the gateway and your PC has not been installed, one of the following names will appear in the Other devices category (the name that displays is dependent on your operating system):

2Wire USB Remote NDIS Ethernet 2Wire Gateway USB

2.

Double-click the adapter name highlighted with a yellow question mark or exclamation point.

3.

Click the Reinstall Driver button to reinstall the driver for your adapter from the CD.

4.

After you have reinstalled the driver, click the RETRY button on the Setup Wizard adapter troubleshooting screen.

5

Document info
Document views52
Page views52
Page last viewedWed Jan 18 11:03:46 UTC 2017
Pages18
Paragraphs293
Words3486

Comments