MY – 2007-
SUPERCHARGER FIT KIT
(g) Reconnect the No. 1 and No. 2 fuel pipe sub- assemblies to the fuel delivery pipe connectors by pushing together until the connector makes a “click” sound. After connecting, check that the pipe and connector are securely connected by pulling on them. Reinstall the clamps on each connector.
(h) To ensure clearance to the supercharger manifold, pry the wire loom retainer up off the stud on the LH cylinder head cover (Fig 5-8). NOTE: Do not omit this step.
Spark Plug Replacement
Unplug the electrical connector from each of the 6 ignition coils (Fig 6-1).
(b) Remove the 6 bolts, then remove the 6 ignition coils (Fig 6-2).
(c) Remove the 6 spark plugs and discard them in a box for the customer. New colder plugs will be installed (Fig 6-3). CAUTION: Blow any dirt or debris from around the spark plugs before removing them.
Page 11 of 45 pages