(i) Reinstall two of the fan nuts (finger tight) so the fan pulley will not fall off (Fig 7-9).
(j) Remove the lower radiator hose. The hose will not be reused.
Installation of the Auxiliary Drive Pulleys.
While releasing the belt tension by turning the belt tensioner counterclockwise, remove the belt from the power steering pump pulley (Figs 8-1 & 8-2). NOTE: It is not necessary to completely remove the belt.
MY – 2007-
SUPERCHARGER FIT KIT
(h) Carefully remove the fan and shroud together so you do not damage the radiator (Fig 7-8). Note: Tape a piece of cardboard (about the size of the radiator) to the back side of the radiator to prevent damage during subsequent steps.
Page 14 of 45 pages