X hits on this document

151 views

0 shares

0 downloads

0 comments

27 / 45

TOYOTA Procedure

Fig 17-9

Fig 17-9

Fig 18-1

Issue: B

10/20/07

FJ CRUISER

MY – 2007-

SUPERCHARGER FIT KIT

(i) Remove the 3 bolts that attach the hood latch support bracket to the bumper and radiator supports (Fig 17-9). Save these fasteners. The bracket will be replaced by the new bracket supplied in the kit (#2).

(j) The AC condenser is mounted at 4 locations, 2 at the top and 2 half way down. Locate the two No. 2 cooler condenser cushions and remove the upper bolt from each (Fig 17-10). Save these bolts.

Fig 17-10

(k) Remove and save the bolts from the two upper No. 1 cooler condenser cushions (Fig 17-11).

  • 18.

    Installation of the Low Temperature Radiator (LTR), Intercooler Pump, Latch, and Horn Assemblies.

    • (a)

      Place the LTR in position in front of the AC condenser. (Fig 18-1). The upper and lower mounting tabs on the LTR align with the bolts removed in steps 17j & 17k.

Page 27 of 45 pages

Document info
Document views151
Page views152
Page last viewedMon Dec 05 13:45:42 UTC 2016
Pages45
Paragraphs1344
Words8482

Comments