X hits on this document

177 views

0 shares

0 downloads

0 comments

37 / 45

TOYOTA Procedure

Fig 20-8

Issue: B

10/20/07

FJ CRUISER

MY – 2007-

SUPERCHARGER FIT KIT

(g) Remove the nut that is on the B (+) connection in the fuse panel (Fig 20-6) and connect red wire with the 6mm ring terminal from the intercooler relay to the B (+) terminal in the fuse panel (Fig 20-6).

Fig 20-6

(i) Remove the 10-amp mini fuse labeled EFI No. 2 (Fig 20-7).

Fig 20-7

(i) Install the T-tap (H12) on the original 10 amp mini fuse (Fig 19-11).

Tap goes toward driver side of fuse

(j) Crimp the supplied female terminal (H13) onto the end of the yellow wire from the intercooler relay harness. Install the fuse with the T-tap back in the same EFI location and then attach the yellow wire to the T-tap (Fig 20-9). CAUTION: When installing the fuse, make sure the tap is toward the driver side of the vehicle (Fig 20-9).

Fig 20-9

Page 37 of 45 pages

Document info
Document views177
Page views178
Page last viewedSat Dec 10 23:04:58 UTC 2016
Pages45
Paragraphs1344
Words8482

Comments