X hits on this document

165 views

0 shares

0 downloads

0 comments

38 / 45

TOYOTA Procedure

Fig 22-1

Fig 22-2

Fig 22-3

Issue: B

10/20/07

FJ CRUISER

15 Amp

MY – 2007-

SUPERCHARGER FIT KIT

(l) Install the 15 amp mini fuse (H11) in the intercooler relay fuse holder (Fig 20-10).

Fig 20-10

  • 21.

    Reinstall the Bumper and Radiator Grille.

    • (a)

      Engage the 2 claws and install the front bumper cover.

    • (b)

      Tighten the 8 screws and 4 bolts. Torque: 3.0 Nm (27 in lbf) Torque: 8.0 Nm (71 in lbf)

    • (c)

      Install the 5 clips.

    • (d)

      Remove the protective tape.

    • (e)

      Engage the 5 clips and install the radiator grill.

    • (f)

      Tighten the 2 screws. Torque: 3.0 Nm (27 in lbf)

    • (g)

      Install the 2 clips.

  • 22.

    Installation of the Vacuum Hoses.

    • (a)

      Remove the cap shown in (Fig 21-2) from the previously removed air surge tank and install it on the forward 3/8”nipple on the supercharger housing (Fig 22-2).

(b) Connect open end B of the EVAP hose (Fig 13-6) to the remaining 3/8” nipple on the supercharger housing (Fig 21-3).

Page 38 of 45 pages

Document info
Document views165
Page views166
Page last viewedWed Dec 07 13:25:24 UTC 2016
Pages45
Paragraphs1344
Words8482

Comments