MY – 2007-
SUPERCHARGER FIT KIT
(c) Finally, connect the ventilation hose that was disconnected in step 4 (b) Fig 4-3 to the 3/8” nipple that is on the bottom of housing supercharger housing (Fig 22-4).
Installation of the Air Cleaner Assembly.
Using a M6x16 bolt (F6), install the air box bracket (F2) to the passenger side cylinder head cover (Fig 22-1) finger tight.
(b) Install the air cleaner assembly using the original bolt and a M6 nut (F4) from the kit (Fig 22-2).
(c) Reconnect the No. 2 ventilation hose, the vacuum hose, mass air flow meter connector, the throttle motor connector, and the air inlet duct (Fig 22-3).
Page 39 of 45 pages