X hits on this document

141 views

0 shares

0 downloads

0 comments

40 / 45

TOYOTA Procedure

Fig 22-4

Issue: B

10/20/07

FJ CRUISER

MY – 2007-

SUPERCHARGER FIT KIT

(d) Reconnect the 2 wire harness clamps removed in step 2 (c) (Fig 22-4).

  • 23.

    Preparation for Vehicle Start-up.

    • (a)

      Using the saved coolant from step 7 (b) pour coolant into the radiator until it is full. Hint:

!

Use of improper coolant may damage the engine cooling system.

!

Use Toyota Super Long Life Coolant or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrate, and non-borate coolant with long-life hybrid organic acid technology.

!

New Toyota vehicles are filled with Toyota Super Long Life Coolant (color is pink, premixed ethylene glycol concentration is approximately 50% and freezing temperature is -35°C (-31°F). When replacing and or adding coolant, Toyota Super Long Life Coolant is recommended.

NOTICE: Do not substitute plain water for engine coolant.

  • (b)

    Check the coolant level inside the radiator by squeezing the inlet and outlet radiator hoses several times by hand. If the coolant level goes down, add coolant.

  • (c)

    Install the radiator cap.

Page 40 of 45 pages

Document info
Document views141
Page views142
Page last viewedSat Dec 03 07:41:41 UTC 2016
Pages45
Paragraphs1344
Words8482

Comments