X hits on this document

490 views

0 shares

0 downloads

0 comments

102 / 182

REASSEMBLY - AUXILIARY SECTION (9-SPEED AND RT-8608L MODELS)

C. Timing and Installation of Auxiliary Countershaft Assemblies

  • 1.

    Apply downward pressure to the high range syn- chronizer ring WHILE TWISTING COUNTER- CLOCKWISE to compress the springs and fully seat ring on blocker pins of low range synchroni- zer.

    • 1.

      If previously removed, install the bearing inner race on front of each countershaft.

  • 5.

    Install the synchronizer assembly on splines of output shaft, low range ring in recess of low range gear.

    • 2.

      IMPORTANT: On the low range gear of each aux- iliary countershaft assembly, use a highly visible color of toolmaker's dye to mark the tooth stamped with an "O" for timing purposes.

Document info
Document views490
Page views490
Page last viewedFri Dec 09 12:26:27 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments