X hits on this document

574 views

0 shares

0 downloads

0 comments

105 / 182

REASSEMBLY - AUXILIARY SECTION (9-SPEED AND RT-8608L MODELS)

  • 5.

    If previously removed, install the O-rings in the

    • I.

      D. and O.D. of range piston.

7.

Position the corresponding new gasket on cover mounting surface and install the range cylinder cover on housing, open port to the upper left. Tighten capscrews to secure cover to housing.

6. In cylinder housing bore, install the range piston on yoke bar, flat side to the rear. Secure with nut tightened to recommended torque ratings (inset).

Document info
Document views574
Page views574
Page last viewedWed Jan 18 16:16:31 UTC 2017
Pages182
Paragraphs2411
Words25289

Comments