X hits on this document

500 views

0 shares

0 downloads

0 comments

107 / 182

DISASSEMBLY - AUXILIARY SECTION (13-SPEED MODELS)

3. Cut lockwire and remove two yoke Iockscrews.

5. Remove range yoke from sliding clutch of syn- chronizer assembly.

  • 4.

    Pull yoke bar from bore of cylinder housing.

    • 6.

      Remove the range piston from cylinder bore. If necessary, remove the O-rings from piston I.D. and O.D. (inset).

Document info
Document views500
Page views500
Page last viewedSat Dec 10 00:28:06 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments