X hits on this document

387 views

0 shares

0 downloads

0 comments

111 / 182

DISASSEMBLY-AUXILIARY SECTION (13-SPEED MODELS)

*Note: Not used in current production or in K-1654 kit

Cut 6480 B-3/84

Was only used with A-4683 Synchronizer Do not use with A-4388 Synchronizer Ref. Service Bulletin #130 7/81

C. Removal and Disassembly of Synchronizer Assembly

1. Spread the countershaft assemblies and pull the synchronizer assembly from splines of rang mainshaft. NOTE: To spread countershaft far enough to re- move synchronizer on RTO & RTOO models move the splitter clutch to the forward position.

e

,

2. Place the larger low range synchronizer ring on bench and pull the high range synchronizer from blocker pins. However, before doing so, cover the assembly with a shop rag to prevent losing the three springs released from high range synchroni- zer at pin locations.

Document info
Document views387
Page views387
Page last viewedSun Dec 04 06:57:35 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments