X hits on this document

597 views

0 shares

0 downloads

0 comments

116 / 182

DISASSEMBLY - AUXILIARY SECTION (13-SPEED MODELS)

3. If necessary, turn out the plug in bottom bore of cover and remove the insert valve.

5. Remove the splitter cylinder housing and gasket from auxiliary housing. If necessary, remove the small O-ring from bore in cylinder housing (inset).

4. Remove the yoke bar from cylinder housing bore. If necessary, remove the O-ring from piston O.D. (inset).

Document info
Document views597
Page views597
Page last viewedThu Jan 19 22:16:38 UTC 2017
Pages182
Paragraphs2411
Words25289

Comments