X hits on this document

417 views

0 shares

0 downloads

0 comments

121 / 182

REASSEMBLY - AUXILIARY SECTION (13-SPEED MODELS)

AUXILIARY SECTION (13-SPEED MODELS)

A. Reassembly and Installation of Range Mainshaft Assembly

1. Secure the output shaft in a vise with mainshaft quill up.

3. Install the bearing in front bore of range main- shaft. Use a small flanged-end driver to properly seat bearing in bore on mainshaft quill.

2. If necessary, press the bushing in rear bore of range mainshaft and install the mainshaft in posi- tion on quill. (inset)

4. Install the "C" ring in groove of mainshaft quill to retain bearing.

Document info
Document views417
Page views417
Page last viewedMon Dec 05 14:34:01 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments