X hits on this document

418 views

0 shares

0 downloads

0 comments

130 / 182

REASSEMBLY - AUXILIARY SECTION (1 3-SPEED MODELS]

2. Install the three springs in bores of high range synchronizer ring.

4. Apply downward pressure to the high range syn- chronizer ring WHILE TWISTING COUNTER- CLOCKWISE to compress the springs and fully seat ring on blocker pins of low range synchroni-

  • 3.

    Place the high range synchronizer ring over blocker pins of low range synchronizer, seating the springs against pins.

    • 5.

      Spread the countershaft assemblies with splitter gear set remaining in time and install the syn- chronizer assembly on splines of range main- shaft, low range ring in recess of low range gear.

Document info
Document views418
Page views418
Page last viewedMon Dec 05 14:55:31 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments