X hits on this document

482 views

0 shares

0 downloads

0 comments

133 / 182

REASSEMBLY - AUXILIARY SECTION (13-SPEED MODELS)

  • 5.

    If previously removed, install the O-rings in the

    • I.

      D. and O.D. of range piston.

7. Position the corresponding new gasket on cover mounting surface and install the range cylinder cover on housing, open port to the upper left.

6. In cylinder housing bore, install the range piston on yoke bar, flat side to the rear. Secure with nut tightened to recommended torque ratings (inset).

Document info
Document views482
Page views482
Page last viewedFri Dec 09 00:33:42 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments