X hits on this document

379 views

0 shares

0 downloads

0 comments

149 / 182

REASSEMBLY-FRONT SECTION

5.

Install the OUTER RACE of auxiliary countershaft front bearing into case bore and against idler plate. NOTE: The bearing INNER RACE is installed on front of auxiliary countershaft and never with outer race.

B. Reassembly of Countershaft Assemblies

2. Align keyway of gear with key in countershaft and press the 1 st speed gear on shaft, long hub of gear to the front of countershaft.

NOTE: Except for the PTO gears, the left and right countershaft assemblies are identical and reassembled in the same manner.

    • 3.

      Press the 2nd speed gear on countershaft, long hub of gear against 1st speed gear hub.

  • 1.

    If previously removed, install the roll pin and key in keyway of countershaft.

Document info
Document views379
Page views379
Page last viewedSun Dec 04 04:38:09 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments