X hits on this document

423 views

0 shares

0 downloads

0 comments

156 / 182

REASSEMBLY - FRONT SECTION

4.

Install the snap ring in groove of front gear hub to retain bearing.

G. Reassembly and Partial Installation of Mainshaft Assembly

1.

If previously removed, install the corresponding snap rings in I.D. of mainshaft gears.

2.

Install the retainer ring on auxiliary drive gear, snap ring groove facing front hub and away from gear teeth.

3.

Start the auxiliary drive gear bearing on front hub, bearing snap ring facing groove in retainer ring. Using both the inner and outer race of bearing as a base, press the bearing on gear with snap ring in groove of retainer ring or use a bearing driver (inset).

Document info
Document views423
Page views423
Page last viewedMon Dec 05 19:11:48 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments