X hits on this document

477 views

0 shares

0 downloads

0 comments

158 / 182

REASSEMBLY - FRONT SECTION

6. Install the 2nd speed gear on shaft against 3rd speed (or Overdrive) gear, clutching teeth up.

8. Remove the key from keyway and install the 2nd speed gear limit washer on mainshaft, flat side of washer down and against spacer. Rotate washer in the 2nd groove of mainshaft to align the splnes of washer with those of the mainshaft and reinsert key in keyway to lock washer in place (inset).

7. Install the spacer in 2nd speed gear, engaging the external splines of spacer with clutching teeth of gear.

Document info
Document views477
Page views477
Page last viewedThu Dec 08 14:36:22 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments