X hits on this document

385 views

0 shares

0 downloads

0 comments

162 / 182

REASSEMBLY-FRONT SECTION

    • 17.

      Check axial clearance and make adjustments, if necessary, between the LO and 1st speed gears as described.

  • 16.

    Remove the key from keyway and install the LO speed gear limit washer on mainshaft, flat side of washer down and against spacer. Rotate washer in the 4th groove of mainshaft to align the splines of washer with those of the mainshaft and rein- sert key in keyway to lock washer in place (inset).

Document info
Document views385
Page views385
Page last viewedSun Dec 04 06:50:26 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments