X hits on this document

507 views

0 shares

0 downloads

0 comments

172 / 182

INSTALLATION

  • -

    COMPANION FLANGE,

AUXILIARY SECTION AND CLUTCH HOUSING

COMPANION FLANGE, AUXILIARY SECTION AND CLUTCH HOUSING

A. Installation of Clutch Housing

1. Position the corresponsing new gasket on hous- ing mounting surface and install the clutch hous- ing on front case, piloting on the six studs and drive gear bearing cover.

  • 3.

    Install the four capscrews and tighten in cross- pattern. See TORQUE RECOMMENDATIONS.

  • 4.

    For models so equipped, install the clutch re- lease mechanism and/or clutch brake assembly. See OPTIONS.

2. Install the six nuts with washers on studs and tighten in cross-pattern. See TORQUE RECOMMENDATIONS.

Document info
Document views507
Page views507
Page last viewedSat Dec 10 09:00:03 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments