X hits on this document

416 views

0 shares

0 downloads

0 comments

176 / 182

lNSTALLATION- SHIFTING CONTROLS

GEAR SHIFT LEVER HOUSING ASSEMBLY

A. Installation

NOTE: For models equipped with a LRC or SRC Assembly, the housing is installed in the same manner described in the following instructions.

3. Install the retaining capscrews in housing flange and tighten to secure the assembly to shift bar housing.

1. Check the shift bar housing assembly to make sure shift block and yoke notches are aligned in the neutral position.

2. Install the new gear shift lever housing gasket in position on shift bar housing and install the gear shift lever housing assembly on shift bar hous- ing, fitting the lever into shift bar and yoke notches.

Document info
Document views416
Page views416
Page last viewedMon Dec 05 14:31:45 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments