X hits on this document

433 views

0 shares

0 downloads

0 comments

177 / 182

INSTALLATION - SHIFTING CONTROLS

AIR SYSTEM

A. Installation of Slave Valve

    • 3.

      Install the hat-type alignment sleeve in bore of slave valve.

  • 1.

    If previously removed, install the air line fittings on slave valve.

4. Position the corresponding new gasket on valve mounting surface and install the slave valve on

case, inserting the end of actuating pin into align- ment sleeve. Secure the valve to case with four

2. Install the spring on shank of actuating pin and insert in bore of transmission case.

retaining capscrews tightened evenly.

B. Installation of Air Lines

(See Air System Schematics on pages 40-47.)

Document info
Document views433
Page views433
Page last viewedTue Dec 06 13:22:45 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments