X hits on this document

412 views

0 shares

0 downloads

0 comments

178 / 182

Tapered Roller Bearing Shimming Procedure

Note: The auxiliary section may be shimmed in either the vertical or horizontal position. Vertical shimming is performed with the transmission removed from the truck while horizontal shimming takes place with the transmission still in the truck.

1

Before installing the auxiliary section, install countershaft

straps on each countershaft. Use three (3) 3/8" x 1" capscrews for each strap.

2

For vertical shimming, place the transmission in the vertical position. Place (2) wood blocks under the clutch housing to prevent the trans- mission from tipping and damaging

the input shaft. Place the auxiliary housing on the front box.

Document info
Document views412
Page views412
Page last viewedMon Dec 05 11:38:48 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments