X hits on this document

426 views

0 shares

0 downloads

0 comments

179 / 182

3

4

5

6

Install the auxiliary housing capscrews. Tighten to the recom- mended torque.

Remove each countershaft strap.

Install the .125 gaging shim and the countershaft bearing cover. Make sure the shim is properly aligned on the bearing race.

Use two (2) 3/8" x 1" capscrews without lock washers. Install the capscrews directly across from each other.

Document info
Document views426
Page views426
Page last viewedTue Dec 06 08:17:19 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments