X hits on this document

450 views

0 shares

0 downloads

0 comments

28 / 182

AIR SYSTEM

AIR FILTER/REGULATOR ASSEMBLY

Cut 6141 -3/86

The air filter contains a replaceable filter element which can be removed by turning out the end cap. This ele- ment should be cleaned at each oil change, or more often under high humidity conditions. Replace if necessary.

SLAVE VALVES

PISTON-TYPE

PISTON-TYPE

POPPET-TYPE

\

Refer to the drawing for disassembly and reassembly of the piston-type slave valve assemblies. Should the pop- pet-type slave valve assembly prove to be defective, replace the complete assembly, as it is non-serviceable. The actuating components used with these valve assemblies are non-interchangeable. Failure to use the correct plunger pin, spring, and alignment sleeve during installation on the transmission will cause hard shifting in Low Range gears.

Document info
Document views450
Page views450
Page last viewedWed Dec 07 09:37:07 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments