X hits on this document

473 views

0 shares

0 downloads

0 comments

33 / 182

AIR SYSTEM

For Models Equipped with the Master Control Valve A-5015 . . .

1. Air Supply (See schematic below.) With the gear shift lever in neutral, select LOW RANGE and loosen the connection at the “H” Port of control valve until it can be determined that AIR is supplied to valve. Reconnect air line.

If there is NO AIR, check for a restriction in the 1/8" O.D. air line between the control valve and

slave valve, making sure this line is connected to tee fitting at the Low Range or “L” Port of slave valve.

LO-LO

NOTE: ARROWS INDICATE DIRECTION OF AIR FLOW. SHADED AREAS INDICATE CHARGED LINES.

Document info
Document views473
Page views473
Page last viewedThu Dec 08 12:10:48 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments