X hits on this document

391 views

0 shares

0 downloads

0 comments

4 / 182

MODEL DESIGNATIONS AND SPECIFICATIONS

Nomenclature:

IMPORTANT: All Eaton Fuller Transmissions are identified by model and serial number. This infor- mation is stamped on the transmission identifica- tion tag and affixed to the case. DO NOT REMOVE OR DESTROY THE TRANS- MISSION IDENTIFICATION TAG.

8-Speed “LL” Series Transmissions

RT-8608L Series Transmissions

CHART NOTES: 1 Lengths measured from face of clutch housing to front bottoming surface of companion flange or yoke.

2 Weight — Listed weights are without clutch housing. Weights include standard controls, which consist of gear shift lever housing, gear shift lever, range and splitter controls and attaching lines. Weight of standard

controls is approximately 10 lbs. (4.5 kg). All weights are approximate. 3 Oil Capacities are approximate, depending on inclination of engine and transmission

. Always fill transmis-

sion with proper grade and type of lubricant to level of filler opening. See LUBRICATION.

Document info
Document views391
Page views391
Page last viewedSun Dec 04 15:40:12 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments