X hits on this document

709 views

0 shares

0 downloads

0 comments

49 / 182

DISASSEMBLY AND REASSEMBLY SHIFTING CONTROLS

AIR SYSTEM

A. Removal of Air Control NOTE: For removal and disassembly of models also equipped with the Countershaft Actuator Valve, see OPTIONS.

2. For models equipped with the Roadranger Valve A-5015 or A-4900, also disconnect the 1/8" O.D. air hose line at the "L" or Low Range Port of slave valve (left); and the 1/8" O.D. air line at the Center Port of reduction cylinder/splitter cylinder cover (right). NOTE: If desired, the gear shift lever housing as- sembly can now be removed from shift bar housing.

1.

Disconnect the two 1/8" O.D. air line or at the "S" or Supply Port and the "P" or End Port of slave valve on transmission case.

NOTE: For models equipped with the A-3546 or Roadranger Valve A-5010, the gear shift lever hous-

ing assembly can now be removed from shift bar housing.

Document info
Document views709
Page views709
Page last viewedWed Jan 25 03:07:42 UTC 2017
Pages182
Paragraphs2411
Words25289

Comments