X hits on this document

453 views

0 shares

0 downloads

0 comments

50 / 182

DISASSEMBLY AND REASSEMBLY SHIFTING CONTROLS

1. Disconnect the two 1/8" O.D. air lines at the Range Valve of models so equipped (left). Remove the ball grip, loosen the valve mounting clamp and remove the valve, mounting clamp, air lines, sheathing and O-rings from gear shift lever (right). NOTE: For disassembly and reassembly of Range Valve, see Page 28.

5. Slide the cover down shift lever to expose valve ports and disconnect the 1/8" O.D. air lines.

  • 4.

    For models so equipped, turn out the two mounting screws in valve cover.

    • 6.

      Loosen the jam nut and turn the Valve and nut from gear shift lever. Remove the valve cover, air lines, sheathing and O-rings from lever.

Document info
Document views453
Page views453
Page last viewedWed Dec 07 13:21:55 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments