X hits on this document

389 views

0 shares

0 downloads

0 comments

66 / 182

DISASSEMBLY - AUXILIARY SECTION (8-SPEED "LL" MODELS)

6. Remove the rance piston from cylinder bore. If necessary, remove the O-rings from piston I.D. and O.D. (inset).

4. Pull yoke bar from bore of cylinder housing.

7. Turn out the capscrews and remove the range cyl- inder housing and gasket. If necessary, remove the small O-ring from groove in housing bore (inset).

5. Remove range yoke from sliding clutch of syn- chronizer assembly.

Document info
Document views389
Page views389
Page last viewedSun Dec 04 08:23:30 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments