X hits on this document

561 views

0 shares

0 downloads

0 comments

69 / 182

DISASSEMBLY - AUXILIARY SECTION (8-SPEED "LL" MODELS)

C. Removal and Disassembly of Synchronizer Assembly

3. Remove the sliding clutch from pins of low range synchronizer ring.

1. Pull the synchronizer assembly from the splines of range mainshaft.

2. Place the larger low range synchronizer ring on bench and pull the high range synchronizer from blocker pins. However, before doing so, cover the assembly with a shop rag to prevent losing the three springs released from high range synchroni- zer at pin locations.

Document info
Document views561
Page views561
Page last viewedTue Jan 17 23:24:16 UTC 2017
Pages182
Paragraphs2411
Words25289

Comments