X hits on this document

540 views

0 shares

0 downloads

0 comments

85 / 182

REASSEMBLY - AUXILIARY SECTION (8-SPEED "LL" MODELS)

E. Reassembly and Installation of Synchronizer Assembly

1. Place the larger low range synchronizer ring on bench and install the sliding clutch on blocker pins, recessed side up.

3. Place the high range synchronizer ring over blocker pins of low range synchronizer, seating the springs against pins.

4. Apply downward pressure to the high range syn- chronizer ring WHILE TWISTING COUNTER- CLOCKWISE to compress the springs and fully seat ring on blocker pins of low range synchronizer.

2. Install the three springs in bores of high range synchronizer ring.

Document info
Document views540
Page views540
Page last viewedMon Jan 16 21:59:46 UTC 2017
Pages182
Paragraphs2411
Words25289

Comments