X hits on this document

506 views

0 shares

0 downloads

0 comments

93 / 182

DISASSEMBLY - AUXILIARY SECTION (9-SPEED AND RT-8608L MODELS]

3. Use a soft bar and maul to drive the coun- tershaft forward and from rear bearings.

5. If necessary, secure the assembly in a vise and re- move the bearing inner race from front of coun- tershaft with jaw pullers. NOTE: The vise used should be equipped with brass jaws or wood blocks to prevent damage to the countershaft.

4. Remove the bearings from bores in auxiliary plate by tapping lightly and evenly to the rear with a soft bar.

Document info
Document views506
Page views506
Page last viewedSat Dec 10 08:52:47 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments