X hits on this document

381 views

0 shares

0 downloads

0 comments

94 / 182

DISASSEMBLY - AUXILIARY SECTION (9-SPEED AND RT-8608L MODELS)

C. Removal and Disassembly of Synchronizer Assembly

2. Place the larger low range synchronizer ring on bench and pull the high range synchronizer from blocker pins. However, before doing so, cover the assembly with a shop rag to prevent losing the three springs released from high range synchroni- zer at pin locations.

1. Pull the synchronizer assembly from the splines of output shaft.

3. Remove the sliding clutch from pins of low range synchronizer ring.

Document info
Document views381
Page views381
Page last viewedSun Dec 04 06:22:00 UTC 2016
Pages182
Paragraphs2411
Words25289

Comments