X hits on this document

PDF document

September 1999 P/N 880-503284-001-A1 - page 24 / 65

160 views

0 shares

0 downloads

0 comments

24 / 65

Configuration

DB-9 female

RJ-11 modular

Usage

pin 3

pin 3

Transmit Data

pin 2

pin 4

Receive Data

pin 5

pin 5

Signal Ground

Your computer may have a DB-9 connector, requiring a second cable or adapter to complete the connection. For this purpose, use the same type of standard PC AT serial cable as would be used to connect to an external modem.

An alternative Craft cable uses DB-9 and RJ-11 connectors. It is wired according to the pinout shown below:

Table 3-2 DB-9 Craft Cable p/n 458-102119-008

Logging On

The first thing you will see after connecting your terminal and pressing the ENTER key is:

YOUR PASSWORD?

Initially there is no password, so just press ENTER again.

The top or Main Menu is displayed.

Figure

SITE NODE

3-1 0 NCC 2020 Main Menu -- VERILINK NCC NODE NAME: ID:

CONTROLLER

at[1,1]:

FW

Rev

4.75

--

<- SLOT ->

SHELF 1 DL 2 3 4 KEY: C=CSU, D=DIU, F=DIU/DDS, B=DIU/DBU, R = SRD, I=IDCSU, T=TU, S=SMDS, V=VCU 1 C 2 [D] 3 4 6 8 9 10 11 12 13 5 7

  • S)

    shelf/slot

  • N)

    near element

  • F)

    far element

  • C)

    configuration

  • P)

    performance

  • D)

    diagnostics

  • O)

    node administration

  • M)

    monitor alarms (OFF)

  • A)

    alm to net mgr (OFF)

  • X)

    system log off

[1,1] NEAR TAC 2010 >

From this menu you may navigate from card to card, or choose various option menus for the current card.

The Main Menu commands are detailed in the table below.

3-2

Verilink NCC 2020 User Manual

Document info
Document views160
Page views160
Page last viewedThu Dec 08 06:05:31 UTC 2016
Pages65
Paragraphs3233
Words20026

Comments