X hits on this document

PDF document

September 1999 P/N 880-503284-001-A1 - page 32 / 65

154 views

0 shares

0 downloads

0 comments

32 / 65

T)

time

D)

date

I)

node id

N)

site name

R)

reset com ports

S)

node controller status

P)

set privileged password

U)

set unprivileged password

M)

config management channel

X)

exit menu

Configuration

Figure 3-4

Node Administration Menu

  • ---

    NODE CONTROLLER MENU ---

[1,1] NEAR TAC 2010 >

Table 3-5

Node Administration Commands

Menu Option

Description

Instructions

Node Administration Commands

Table 3-5 lists the commands available on the Node Administration Menu.

Sets the time of

Enter new time (hh:mm:ss): — use the format shown.

day. Sets the date.

Enter new date (mm-dd-yy): — use format shown.

Sets a numeric identifier.

Maximum field length = ten digits, distinguishes one node from another, each node in a network must have a unique node ID.

Sets an alpha- numeric identifier used to tell one node from another.

Site Name: Tech Pubs NCC 2020 Change (Y/N)? — if yes is selected, a second prompt appears:

New Site Name (40): — enter a site name using up to 40 alpha-numeric characters.

T)

time

D)

date

I)

node id

N)

site name

R)

reset com ports

Resets the hardwar used for Craft port and modem or direct PC

connections.

e No confirmation is required or given. The command prompt returns immediately.

Used if a port seems to be in a locked condition.

3-10

Verilink NCC 2020 User Manual

Document info
Document views154
Page views154
Page last viewedWed Dec 07 09:29:26 UTC 2016
Pages65
Paragraphs3233
Words20026

Comments