X hits on this document

PDF document

September 1999 P/N 880-503284-001-A1 - page 33 / 65

179 views

0 shares

0 downloads

0 comments

33 / 65

Configuration

Menu Option

Description

Instructions

S)

node controller

status

Produces a short display of information about the NCC functions.

Baud Rate = Craft interface session speed.

Last Reset = time of last power-up.

CONTROLLER STATUS EXECUTION = ROM BAUD RATE = 19200 RAM TEST = PASS DUART TEST = PASS LAST RESET = 5-14-98 9:19:35 RTC TIME = 5-14-98 9:29:12

P)

set privileged

password

U)

set unprivileged

password

Sets password for the privileged level operator.

Current Privileged Password: <> Change (Y/N)? Privileged users may make configuration changes.

Sets password for the unprivileged level operator.

Current Unprivileged Password: <> Change (Y/N)?

Unprivileged users have read-only access, they may not make configuration changes.

M) config management channel

Calls the Management Channel Menu.

Required only if a dial-up modem connection will be used, see Table 3-6 below.

X)

exit menu

Exits this menu

Returns to NCC 2020 Main Menu.

Management Channel Menu

When M is selected on the NCC 2020 Node Administration Menu, the Management Channel Menu is presented:

Use

U1) send

Rate

B1) 9600

Attempt

R1) 255

Interval

I1) 10S

Figure 3-5

Management Channel Menu

  • ----

    MANAGEMENT CHANNEL ----

U2) none B2) 0 R2) 0 I2) 0 S

Type

  • T)

    auto config

    • ----

      alarm path configuration ----

Secondary

Wait

W) 1S

Primary

Primary address......A1) Georgia Secondary address....A2) Illinois

X) Exit menu

[1,1] NEAR TAC 2010 >

Verilink NCC 2020 User Manual

3-11

Document info
Document views179
Page views179
Page last viewedSat Dec 10 17:21:39 UTC 2016
Pages65
Paragraphs3233
Words20026

Comments