X hits on this document

PDF document

September 1999 P/N 880-503284-001-A1 - page 40 / 65

123 views

0 shares

0 downloads

0 comments

40 / 65

TAC 2130 DIU 2130

Canned configuration #1, assigns all 24 timeslots to data port #1.

TAC 2130 DIU 2130

Canned configuration #2, assigns timeslots 1-12 to data port #1 and timeslots 13-24 to data port #2 (data port #2 ignored by TAC 2130).

TAC 2130 DIU 2130

Canned configuration #3, assigns timeslots 1-8 to data port #1 and timeslots 9-16 to data port #2 (data port #2 ignored by TAC 2130).

TAC 2130 DIU 2130

Canned configuration #4, assigns timeslots 1-6 to data port #1 and timeslots 7-12 to data port #2 (data port #2 ignored by TAC 2130).

TAC 2130 DIU 2130

Canned configuration #5assigns timeslots 1-4 to data port #1 and timeslots 5-8 to data port #2 (data port #2 ignored by TAC 2130).

TAC 2130 DIU 2130

Canned configuration #6, assigns timeslots 1-2 to data port #1 and timeslots 3-4 to data port #2 (data port #2 ignored by TAC 2130).

TAC 2130 DIU 2130

Canned configuration #7, assigns timeslots 1-23 to data port #1 and timeslot 24 to data port #2 (data port #2 ignored by TAC 2130).

TAC 2130 DIU 2130 DIU 2131

Sets DTE port(s) clock to TT, the data port samples Transmit Data during the negative going transition of a clock received from the DTE (on the pair Terminal Timing in RS-422, SCTE in V.35 or XTC in RS- 232).

TAC 2130 DIU 2130

Sets DTE port(s) clock to inverted ST (ST) data port samples Transmit Data lead during positive going transition of transmit clock signal.

TAC 2130 DIU 2130

Sets DTE ports to n 56 kbit/s (as required for an AMI T1).

TAC 2130 DIU 2130

Unassigns Port 1 timeslot(s).

DIU 2130

Unassigns Port 2 timeslot(s).

NCC 2020

Resets NCC password for the Craft interface to the default condition (no password).

ALL

Clears the address command. Releases currently selected module. Use this command if you change your mind after selecting a module in step two, or if you select the wrong module accidentally, or to practice double-clicking.

Configuration

Code

81

82

83

84

85

86

87

88

89

90

91

92

99

00

Applies to

Description

3-18

Verilink NCC 2020 User Manual

Document info
Document views123
Page views123
Page last viewedSat Dec 03 13:39:43 UTC 2016
Pages65
Paragraphs3233
Words20026

Comments