Accessory uses and buildings may be permitted as customarily incidental to any of the principal and conditionally permitted uses listed above.
Minimum lot area on sewer7,500 sq.ft. for single-family; 10,000 sq.ft. for two-family dwellings; add 2,500 sq. ft. per multi-family unit
Min. lot width at bldg. line60 feet for one-family; 75 feet for two-family dwellings; over two family 90 ft.
Minimum front yard25 feet
Minimum side yard (each side)7 feet
Minimum rear yard25 feet
Maximum building height36' or 3 stories
Maximum lot coverage30 percent
SignsSee Article XI
ParkingSee Article X
Buffer ZoneSee Article XV
This residential district provides for medium and high population density. The principal use of land may include two-family residential units to multi-family dwellings. Uses are also permitted on a conditional or accessory basis that complement the more intense residential use that is intended in an R-3 district.
a.Detached single-family dwellings
b.Detached two-family dwellings
c. Multi-family dwellings including town houses, condominiums, rooming and boarding houses and tourist homes