X hits on this document

PDF document

ABB COMBUSTION ENGINEERING, INC., 1974 to 1990 - page 4 / 10

31 views

0 shares

0 downloads

0 comments

4 / 10

Resume –F.V Ellis

Page 4

Ellis, F. V. and Viswanathan, R., Review of Type IV Cracking, Fitness-for-Service Evaluations in Petroleum and Fossil Power Plants, ASME, NY, NY, 1998, pp. 59- 76.

Ellis, F. V., Sielski, D. R. and Viswanathan, R., Guidelines for Life Assessment of High Temperature Bolting, Fitness-for-Service Evaluations in Petroleum and Fossil Power Plants, ASME, NY, NY, 1998, pp. 119-127.

Ellis, F. V. and Viswanathan, R., Review of Type IV Cracking in Piping Welds, Third International EPRI Conference on Welding and Repair Technology For Power Plants, Scottsdale, AZ, 1998.

Ellis, F. V., Tordonato, S. and Walker, C., Failure Analysis for Type 321H Superheater Bends, Fitness for Adverse Environments in Petroleum and Power Equipment, ASME, NY, NY, 1997, pp. 1-9.

Ellis, F. V. and Tordonato, S., Boiler Tubing Life Assessment and Failure Analysis Studies, International Conference on Boiler Tube Failures in Fossil Plants, EPRI, Palo Alto, 1997.

Ellis, F. V., Review of Type IV Cracking in Piping Welds, EPRI TR-108971 Final Report, Electric Power Research Institute, Palo Alto, CA, 1997.

Ellis, F. V., Evaluation of Service Exposed 1Cr-1Mo-1/4V Turbine Piping, Service Experience and Design in Pressure Vessels and Piping (Including High Pressure Technology), ASME, NY, NY, 1996, pp. 87-97.

Ellis, F. V., Cyclic Temperature Creep Rupture Properties of TP 347H Stainless Steel Tubing, Plant Systems/Components Aging Management - 1996, ASME, NY, NY, 1996, pp. 137-146.

Lin, Y. C. and Ellis, F. V., Failure Analysis for a Carbon Steel Vaporizer Coil, Microstructural Science, Vol. 22, ASM International, Materials Park, OH, 1995, pp. 491-499.

Ellis, F. V., Steakley, M. F. and Roberts, B. W., Creep and Rupture Properties of Longitudinal Seam Welded Hot Reheat Piping, Service Experience, Structural Integrity, Severe Accidents, and Erosion in Nuclear and Fossil Plants, ASME, NY, NY, 1995, pp. 257-267.

Ellis, F. V., Lin, Y. C. and Tordonato, S., Creep and Rupture Properties of Virgin 1-1/4Cr-1/2Mo Plate and Submerged Arc Weldments, Plant Systems/Components Aging Management - 1995, ASME, NY, NY, 1995, pp. 163-172.

TEChnology Tordonato Energy Consultants, Inc.

Document info
Document views31
Page views31
Page last viewedMon Dec 05 00:43:32 UTC 2016
Pages10
Paragraphs157
Words3292

Comments