X hits on this document

PDF document

ABB COMBUSTION ENGINEERING, INC., 1974 to 1990 - page 5 / 10

32 views

0 shares

0 downloads

0 comments

5 / 10

Resume –F.V Ellis

Page 5

Lin, Y. C. and Ellis, F. V., Failure Analysis for a Carbon Steel Vaporizer Coil, Microstructural Science, Vol. 22, ASM International, Materials Park, OH, 1995, pp. 491-499.

Ellis, F. V., Life Assessment Using Metallographic and Mechanical Methods, Materials Characterization, Vol. 32, No. 2, Mar. 1994, pp.79-87.

Ellis, F. V., Creep-Rupture Properties of a Failed 2-1/4Cr-1Mo Longitudinal Seam Weldment, Service Experience and Reliability Improvement:Nuclear, Fossil, and Petrochemical Plants, ASME, NY, NY, 1994, pp. 165-174.

Ellis, F. V., Tertiary Creep and Rupture Properties for Service Exposed 2-1/4Cr- 1Mo Base and Weld Metal, Service Experience and Reliability Improvement:Nuclear, Fossil, and Petrochemical Plants , ASME, NY, NY, 1994, pp. 131-140.

Ellis, F. V. and Brosche, D. J.., Creep-Rupture Properties of Low Carbon Virgin 2-1/4Cr-1Mo SAW Longitudinal Seam Weldments and Effect of Specimen Size, High-Temperature Service and Time Dependent Failure, ASME, NY, NY, 1993, pp. 147-156.

Ellis, F. V. and Swindeman, R. W., Creep Constitutive Equations for Grade 91 Steel, High-Temperature Service and Time Dependent Failure, ASME, NY, NY, 1993, pp. 157-166.

Ellis, F. V. and Tordonato, S., Probabilistic Life Assessment for Waterwall Tubing, Service Experience and Life Management: Nuclear, Fossil, and Petrochemical Plants, ASME, NY, NY, 1993, pp. 115-122.

Ellis, F. V., Ibarra, S.and Mack, N. C., Remaining Creep Life Estimation for Carbon Steel Mitered Elbow, Service Experience and Life Management: Nuclear, Fossil, and Petrochemical Plants, ASME, NY, NY, 1993, pp. 213-220.

Ellis, F. V., Roberts, B. W., Steakley, M. F., and Hilton, S. O., Application of Creep Swelling Data In Life Assessment of High Temperature Piping, Creep:Characterization, Damage and Life Assessment, ASM International, Materials Park, OH, 1992, pp. 481-489.

Swindeman, R. W., Goodwin, G. M. and Ellis, F. V., Filler Metals for Type 316N Stainless Steel, presented at ASME Pressure Vessel and Piping Conference, New Orleans, LA, 1992.

Bynum, J. E. , Ellis, F. V., Roberts, B. W. and Canonico, D. A., High Temperature Creep of Type 304 Stainless Steel, presented at ASME Pressure Vessel and Piping Conference, New Orleans, LA, 1992.

Ellis, F. V., Henry, J. F., Tordonato, S. and Jirinec, M. J., Metallurgical Evaluation of Boiler Tube Samples for Failure Prevention, Proceedings, International Conference on Boiler Tube Failures in Fossil Plants, Electric Power Research Institute, Palo Alto, CA, Nov., 1991.

TEChnology Tordonato Energy Consultants, Inc.

Document info
Document views32
Page views32
Page last viewedMon Dec 05 03:00:27 UTC 2016
Pages10
Paragraphs157
Words3292

Comments