X hits on this document

PDF document

ABB COMBUSTION ENGINEERING, INC., 1974 to 1990 - page 6 / 10

29 views

0 shares

0 downloads

0 comments

6 / 10

Resume –F.V Ellis

Page 6

Ellis, F. V., Effect of Creep Damage on Fatigue and Creep-Fatigue Properties of 1Cr-1/2Mo Steel, Microstructural Science, Vol. 19, ASM International, Materials Park, OH, 1991, pp. 341-354.

Ellis, F. V., Metallurgical Evaluation of Chromized Coatings for Boiler Tubing Applications, Microstructural Science, Vol. 19, ASM International, Materials Park, OH, 1991, pp. 597-606.

Ellis, F. V., Creep and Metallography of Low Columbium Modified 9Cr-1Mo Shielded Metal Arc Weld Metal, Microstructural Science, Vol. 19, ASM International, Materials Park, OH, 1991, pp. 771-780.

Hayes, K. L., Henry, J. F. and Ellis, F. V., Evaluation and Weld Repair of Cracked Field Welds in A376 TP316N Stainless Steel Main Steam Piping, presented at American Welding Society 72nd Annual Convention, April, 1991, Detroit, MI.

Miller, D. A., Gladwin, D., Borden, M. P., and Ellis, F. V. Remaining Life Estimation of Boiler Pressure Parts, Vol. 3: Creep-Fatigue Interaction, EPRI CS- 5588, Vol. 5, Electric Power Research Institute, Palo Alto, CA, 1991.

Ellis, F. V., Henry, J. F., and Roberts, B. W., Review of Submerged Arc Weldment Metallography and Creep Rupture Properties, presented at International Metallographic Conference, July, 1990, Cinn., OH.

Ellis, F. V. and Bynum, J. E., Creep and Tensile Properties of SA508 Class 3 Forging Material, Damage Assessment, Reliability, and Life Prediction of Power Plant Components, ASME, NY, NY, 1990, pp. 37-46.

Ellis, F. V., Henry, J. F., and Roberts, B. W., Welding, Fabrication and Service Experience with Modified 9Cr-1Mo Steel, New Alloys for Pressure Vessels and Piping, ASME, NY, NY, 1990, pp. 55-63.

Henry, J. F. and Ellis, F. V., The Effect of SA Weld Metal Inclusions and Specimen Size on Rupture Life, Damage Assessment, Reliability and Life Prediction of Power Plant Components, ASME, NY, NY, 1990, pp. 47-55.

Henry, J. F., Ellis, F. V., and Lundin, C. D., The Effects of Flux Composition on the Elevated Temperature Properties of Submerged-Arc Weldments, Welding Research Council Bulletin 354, Welding Research Council, NY, NY, 1990.

Ellis, F. V., DeBeer, R. J., and Roberts, B. W. Sigma Phase in 316 Stainless Piping; Main Steam Piping Failure: Eddystone-1 Plant, EPRI GS-6286, Electric Power Research Institute, Palo Alto, CA, 1989.

Shammas, M. S., Ellis, F. V. and Henry, J. F., Remaining-Life Estimation of Boiler Pressure Parts, Vol. 4: Metallographic Models for Weld-Heat-Affected- Zone, EPRI CS-5588, Vol. 4, Electric Power Research Institute, Palo Alto, CA, 1989.

TEChnology Tordonato Energy Consultants, Inc.

Document info
Document views29
Page views29
Page last viewedFri Oct 28 03:11:40 UTC 2016
Pages10
Paragraphs157
Words3292

Comments