X hits on this document

PDF document

ABB COMBUSTION ENGINEERING, INC., 1974 to 1990 - page 9 / 10

34 views

0 shares

0 downloads

0 comments

9 / 10

Resume –F.V Ellis

Page 9

Cane, B. J., Townsend, R. D., Ellis, F. V. and Roberts, B. W., Remaining Life Estimation by Metallographic and Miniature Specimen Methods, Proceedings: Fossil Plant Life Extension Conference and Workshop, EPRI CS-4207, August, 1985, pp. 23-1 to 23-14.

Ellis, F. V., Fabricator Perspectives on Analysis. Methods for Dissimilar Metal Weldments, Proceedings: Seminar on Dissimilar Welds in Fossil-Fired Boilers, EPRI CE-3623, July 1985, pp. 2-25 to 2-50.

Roberts, B. W., Ellis, F. V., and Viswanathan, R., Utility Survey and Inspection for Life Assessment of Elevated Temperature Headers, Proceedings of the American Power Conference, Vol. 47, April 1985, Illinois Institute of Technology, Chicago, Ill., pp. 289-301.

DeLong, J. F., Siddall, W. F., Ellis, F. V., Haneda, H., Tauchiya, T., Diakoku, T., Masuyama, F., and Setaguchi, K., Operating Experiences and Reliability Evaluation on Main Steam Line Pressure Parts of the Ultra Super Critical (USC) Power Plant, The Thermal and Nuclear Power, Vol. 35, No. 11, Nov. 1984, pp. 7- 30.

Oldfield, W., and Ellis, F. V., Between Heats Charpy Energy and Initiation Fracture Toughness Variation of SA533B-1, ASME, June 1983, 83-PVP-78.

Ellis, F. V. and Bynum, J. E., Evaluation of TP316 Stainless Steel Main Steam Line After 125,000 Hours of Service, Advances in Life Prediction Methods, ASME, April 1983, pp. 337-345.

Ellis, F. V., Hilton, S. O., Henry, J. F., and Bynum, J. E., Influence of Service Exposure on Base and Weld Metal of 1/2 Cr-1/2 Mo-1/2 V High-Pressure Steam Inlet Piping, Journal of Pressure Vessel Technology, May 1982, pp. 140-156.

Ellis, F. V., Stress Considerations for Dissimilar Metal Welds, Joining Dissimilar Metals, AWS/EPRI Conference Proceedings, Pittsburgh, Pa. Aug. 1982, pp. 140-156.

Hilton, S. O, Cato, S. N., and Ellis, F. V., Metallurgical Characteristics of Austenitic Weld Metal Transition Joint Failures, Joining Dissimilar Metals, AWS/EPRI Conference Proceedings, Pittsburgh, Pa. Aug. 1982, pp. 99-112.

Ellis, F. V., 17-14 CuMo Evaluation after 20 years of Service, Eddystone Unit No. 1, ASM Solutions to Material Problems in Power Plants Conference, Dec., 1980, Philadelphia, PA.

Roberts, B. W., Ellis, F. V., and Bynum, J. E., Remaining Creep and Stress Rupture Life Under Nonsteady Temperature and Stress, Journal of Engineering Materials and Technology, October 1979, Vol. 101, No. 4, pp. 331-336.

TEChnology Tordonato Energy Consultants, Inc.

Document info
Document views34
Page views34
Page last viewedTue Dec 06 20:19:59 UTC 2016
Pages10
Paragraphs157
Words3292

Comments