X hits on this document

231 views

0 shares

0 downloads

0 comments

21 / 37

branch lapel Insignia

Placement of Us or Va branch Insignia (male)

  • 1.

    Position the guide with the “X” exactly over the notch in the collar/lapel.

  • 2.

    Keeping the “X” on the notch, rotate the guide until the lines are parallel with the inside edge of the collar.

  • 3.

    Position the US or VA touching the top of the guide, centered over the vertical line.

  • 4.

    Position the branch insignia touching the bottom of the guide, centered under the same vertical line.

Placement of Us or Va branch Insignia (female)

  • 1.

    Position the US or VA so that it touches the guide as shown.

  • 2.

    Keeping the “X” (on the center line of the guide),on the seam of the collar/lapel, position the US or VA in the middle of the collar.

  • 3.

    This line is parallel to the inside edge of the collar.

  • 4.

    Position the branch insignia touching the bottom of the guide, centered on the vertical line above it.

20

Document info
Document views231
Page views231
Page last viewedSat Dec 10 07:03:19 UTC 2016
Pages37
Paragraphs349
Words6487

Comments