Brass Sales Co Inc.
95% High Efficiency Furnace
Power Gas 45,00 BTU
Power Gas 72,00 BTU
Gas Furnace 95.1%+ AFUE 45,000 thru 72,000 Btu/h
The CMF95 Series Furnace is a classic and time honored design. The new model CMF95 Furnace incorporates a multi-speed blower and multi-fired burner. Classic design countered with new technology make the new CMF95 today's choice for a multi-application fossil fuel heating appliance.
18” Wide 24 3/16” Deep 57” Tall
30 second blower delay at start-up assures a warm duct temperature at fur-
nace start-up. Adjustable blower off settings (60, 90, 120 and 180 seconds).
30 second post purge increases life of heat exchanger.
Hot surface igniter: Innovative application of a silicon nitride type igniter.
Utilizes proven Smartlite® technology.
Flexible category IV venting system: May be vertically or horizontally
vented using either a one pipe or two-pipe system for maximum flexibility in installation.
High Static Blowers: All models equipped with high static blowers.
Tubular primary heat exchanger: Heavy gauge aluminized steel heat
exchanger and stainless steel secondary heat exchanger assures a long life.
90 second fixed cooling cycle blower-off delay (TDR ) increases cooling
performance when matched with a NORDYNE coil.
Multi-speed direct drive blower: Designed to give a wide range of cooling
capacities. Switches on PCB, provide ultra easy motor speed selection.
LP convertible: Simple burner orifice and regulator spring change for ease
Diagnostic lights for easy troubleshooting without counting flashes:
Dedicated light for flame signal strength and 2 lights in combination to indi- cate all other fault codes with easy to recognize states without counting flashes.
Sloped Roof VentilAire IV Kit
Concentric VentilAire Kit
B Cabinet Case Coil Wrapper
MA-100 Universal Base Kit (12x12x13)
MA-200 Universal Base Kit (12x12x8)
CB-200A Cottage Base
Automatic Shut-Off Damper